Backrest ❯ Frame ❯ Seat ❯ Wheels ❯ Footrest ❯
Prev
Colors
Next
Please select the primary color for your chair. If you select a custom powder coat color, you will be contacted after order to confirm the color. Anodized frames are additional cost and add an additional 3-4 weeks lead time (total 9-10 weeks).

Note: Colors shown in the configurator may differ in appearance from the actual color on the frame. While every effort is made to help appearance match, differences such as which device the color is viewed on or screen temperature may affect the viewers experience.

Powder Coat

Secondary color is currently only available in black anodize. Please check back later for additional color options.
Anodized Aluminum

Important!

For more information about all possible custom powder coat colors, please visit prismaticpowders.com.

Select seat type for your chair. Please note that images shown are for visual representation only and may differ from the actual appearance you receive.
Fabric (Soft Seat)

Carbon Fiber (Hard Seat)

+

Aluminum (Hard Seat)

+

Slide to adjust the measurements

Additional supports and cost are added for Rear Seat Width greater than 18".
If Seat Taper is applied, the frame will be 1.5" narrower at the front of the seat. Cannot be combined with Y Taper frames.

+

Additional support and cost are added for total Frame Length (Seat Depth + Front Extension) greater than 18".

Important! Modifying the seat height may affect the allowable adjustment for seat to footrest length. This can be adjusted slightly after receiving your wheelchair.

Select frame type for your chair. Tapered frame types are additional cost.
Square frame

V-taper

+

Y-taper

+

No additional support frame

Additional support frame

+

Slide to adjust the measurements

No Flip Up Handles

Flip Up Handles

+

Slide to adjust the measurements

Select footrest type for your chair. Note that the Open Loop Footrest angle is welded and not adjustable after receiving.
Plate

Open Loop

+

Slide to adjust the measurements

The IND Mobility PowerTube is a lightweight, high-performance powered axle upgrade kit that transforms a manual wheelchair into a joystick-driven e-chair. Click on the link below the selection to learn more.
Manual Axle

PowerTube Upgrade - Increases manufacturing lead time up to 16 weeks (Learn More)

+

Standard Caster

Frog Legs™ Carbon Fiber Fork Suspension System with Whisper Wheel

+

No Antitippers

Antitippers

+

If you choose to BYOW (bring your own wheels), please note that you will receive a refund or a credit after your purchase.
Yes

I have my own wheels and axle pins

Please select your handrim. Round Aluminum handrims are included. Wooden handrims have an elongated cross section and color options available.
Aluminum

Wooden

+

Aluminum handrims are only available in black anodize. Wooden handrims are available in multiple color stain options. Wooden handrims are additional cost.
Anodized Aluminum
Wood

Slide to adjust the measurements

The rear wheel spacing visualization is temporarily incorrect while we are updating our rear wheel spacing constraints. The spacing will be set to the minimum value possible. In general, if you select a 0 degree camber, the rear wheel spacing will be set to 1 inch. If you select 2 degree camber, it will be set to 7/8 inch, and if you select 4 degree camber, it will be set to 3/4 inch. If you would like a larger rear wheel spacing, please note this request when you place your order.

Important! The rear wheel spacing visualization is temporarily incorrect while we are updating our rear wheel spacing constraints. The spacing will be set to the minimum value possible. In general, if you select a 0 degree camber, the rear wheel spacing will be set to 1 inch. If you select 2 degree camber, it will be set to 7/8 inch, and if you select 4 degree camber, it will be set to 3/4 inch. If you would like a larger rear wheel spacing, please note this request when you place your order.

No Lapstacker

Lapstacker

+

No Wheelchair Armor

Wheelchair Armor

+

jsDocs